Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
360
config address_binding dhcp_snoop max_entry
can be learned.
all - indicates all ports on the Switch.
limit - See below:
<value 1-50> - Specify the maximum number.
no_limit - Specifies that the maximum number of learned entries is unlimited.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To set the maximum number of DHCP IPv4 snooping entries that ports 1–3 can learned to 10:
DGS-3627:admin# config address_binding dhcp_snoop max_entry ports 1-3 limit 10.
Command: config address_binding dhcp_snoop max_entry ports 1-3 limit 10.
Success.
DGS-3627:admin#
enable address_binding trap_log
Purpose Used to enable IMPB traps and logs.
Syntax
enable address_binding trap_log
Description This command is used to send traps and logs when the IMPB module detects an illegal IP
and MAC address.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the IMPB traps and logs:
DGS-3627:admin# enable address_binding trap_log
Command: enable address_binding trap_log
Success.
DGS-3627:admin#
disable address_binding trap_log
Purpose Used to disable the IMPB traps and logs.
Syntax
disable address_binding trap_log
Description This command is used to disable IMPB traps and logs.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable IMPB traps and logs: