Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
17
save
Purpose Used to save changes in the Switch’s configuration to non-volatile RAM.
Syntax
save {[config {<drive_id>} <pathname 64> | log | all]}
Description This command is used to enter the current switch configuration or log file into non-volatile
RAM. The saved switch configuration will be loaded into the Switch’s memory each time the
Switch is restarted.
Parameters
config <drive_id> – Specify to save current settings to the Flash memory of the switch.
<drive_id> – Specify the ID of the drive where the log or configuration file will be placed.
<pathname 64> – Enter a name of up to 64 characters to define the file to be saved on the
flash drive.
log – Specify to save current Switch log to NV-RAM.
all – Use to save the configuration and log file to NV-RAM.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To save the Switch’s current configuration to non-volatile RAM:
DGS-3627:admin# save
Command: save
Saving all configurations to NV-RAM... Done.
DGS-3627:admin#
reboot
Purpose Used to restart the Switch.
Syntax
reboot {<string>}
Description This command is used to restart the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To restart the Switch:
DGS-3627:admin# reboot
Command: reboot
Are you sure want to proceed with the system reboot? (y|n) y
Please wait, the switch is rebooting...