Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
327
DGS-3627:admin# show mld_snooping group
Command: show mld_snooping group
Source/Group : 2001::1/FE1E::1
VLAN Name/VID :default/1
Port Member : 1-2
Mode : INCLUDE
Source/Group : 2002::2/FE1E::1
VLAN Name/VID: : default/1
Port Member : 3
Mode : EXCLUDE
Source/Group : NULL/FE1E::2
VLAN Name/VID : default/1
Port Member : 4-5
Mode : EXCLUDE
Total Entries : 3
DGS-3627:admin#
show mld_snooping forwarding
Purpose This command displays the switch’s current MLD snooping forwarding table.
Syntax
show mld_snooping forwarding {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Description It provides an easy way for users to check the list of ports that the multicast group that comes
from specific sources will be forwarded to. The packet comes from the source VLAN. They
will be forwarded to the forwarding VLAN. The MLD snooping further restricts the forwarding
ports.
Parameters
vlan - (Optional) Specify the name of the VLAN for which you want to view MLD snooping
forwarding table information.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specify the ID of the VLAN for which you want to view MLD snooping
forwarding table information.
<vlanid_list> - Enter the VLAN ID list here.
If no parameter is specified, the system will display all current MLD snooping forwarding table
entries of the switch.
Restrictions None.
Example usage:
To show all MLD snooping forwarding entries located on the switch: