Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
224
config dhcpv6_relay
Description This command can add or delete an IPv6 destination address to forward (relay) DHCPv6
packets.
Parameters
add - Add an IPv6 destination to the DHCPv6 relay table.
delete - Delete an IPv6 destination from the DHCPv6 relay table
ipif_name - The name of the IP interface in which DHCPv6 relay is to be enabled.
ipv6addr - The DHCPv6 server IP address.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To add a DHCPv6 server to the relay table:
DGS-3627:admin# config dhcpv6_relay add ipif System 2001:DB8:1234:0:218:FEFF:FEFB:CC0E
Command: config dhcpv6_relay add ipif System 2001:DB8:1234:0:218:FEFF:FEFB:CC0E
Success.
DGS-3627:admin#
config dhcpv6_relay ipif
Purpose This command is used to configure the DHCPv6 relay state of one or all of the specified
interfaces.
Syntax
config dhcpv6_relay ipif [<ipif_name 12> | all] state [enable | disable]
Description This command is used to configure the DHCPv6 relay state of one or all of the specified
interfaces.
Parameters
ipif_name - The name of the IP interface. The value all indicates all configured IP interfaces.
state - See below:
enable - Choose this parameter to enable the DHCPv6 relay state of the interface.
disable - Choose this parameter to disable the DHCPv6 relay state of the interface.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the DHCPv6 relay state of the System interface to enable:
DGS-3627:admin# config dhcpv6_relay ipif System state enable
Command: config dhcpv6_relay ipif System state enable
Success.
DGS-3627:admin#
show dhcpv6_relay
Purpose This command displays the current DHCPv6 relay configuration.
Syntax
show dhcpv6_relay {ipif <ipif_name 12>}
Description This command will display the current DHCPv6 relay configuration of all interfaces, or if an IP
interface name is specified, the DHCPv6 relay configuration for that IP interface.