Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
440
Command Parameters
enable mac_based_access_control
disable mac_based_access_control
config mac_based_access_control
password
<passwd 16>
config mac_based_access_control
method
[local | radius]
config mac_based_access_control
guest_vlan ports
<portlist>
config mac_based_access_control
ports
[<portlist> | all] {state [enable | disable] | mode [port_based | host_based] |
aging_time [infinite | <min 1-1440>] | [block_time | hold_time ] [infinite|<sec 1-
300>] | max_users [<value 1-4000> | no_limit]}(1)
create mac_based_access_control [guest_vlan <vlan_name 32> | guest_vlanid <vlanid 1-4094>]
delete mac_based_access_control [guest_vlan <vlan_name 32> | guest_vlanid < vlanid 1-4094>]
clear mac_based_access_control
auth_state
[ports [all | <portlist>] | mac_addr <macaddr>]
create
mac_based_access_control_local
mac
<macaddr> {[vlan <vlan_name 32> | vlanid < vlanid 1-4094>]}
config
mac_based_access_control_local
mac
<macaddr> [vlan <vlan_name 32> | vlanid < vlanid 1-4094> | clear_vlan]
delete
mac_based_access_control_local
[mac <macaddr> | vlan <vlan_name 32> | vlanid < vlanid 1-4094>]
config mac_based_access_control
authorization network
{radius [enable | disable] | local [enable | disable]} (1)
show mac_based_access_control {ports {<portlist>}}
show
mac_based_access_control_local
{[mac <macaddr> | vlan <vlan_name 32> | vlanid <1-4094>]}
show mac_based_access_control
auth_state ports
{<portlist>}
config mac_based_access_control
max_users
[<value 1-4000> | no_limit]
Each command is listed, in detail, in the following sections.
enable mac_based_access_control
Purpose Used to enable MAC-based Access Control.
Syntax
enable mac_based_access_control
Description This command enables the MAC-based Access Control function.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the MAC-based Access Control global state: