Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
518
Example usage:
To show the current OSPF debug flag setting:
DGS-3627:admin# debug ospf show flag
Command: debug ospf show flag
Current OSPF Flags Setting:
Neighbor State Change
Interface State Change
LSA Originating
LSA Operating
LSA Receiving
LSA Flooding
Packet Receiving
Packet Sending
Retransmission
Timer
DR Selection
Route
Redistribution
Virtual Link
SPF Intra
SPF Inter
SPF Extern
DGS-3627:admin#
debug ospf neighbor_state_change
Purpose Used to enable or disable debug information flags about neighbor state change.
Syntax
debug ospf neighbor_state_change state [enable | disable]
Description This command is used to enable or disable debug information flags about neighbor state
change.
Parameters
state - The state of the OSPF neighbor state change debug.
Restrictions Only Administrator level users can issue this command.
Example usage:
To enable OSPF neighbor state change debug:
DGS-3627:admin# debug ospf neighbor_state_change state enable
Command: debug ospf neighbor_state_change state enable
Success.
DGS-3627:admin#
debug ospf interface_state_change
Purpose Used to enable or disable debug information flags about interface state change.
Syntax
debug ospf interface_state_change {dr_bdr_selection} state [enable | disable]
Description This command is used to enable or disable debug information flags about interface state