Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
214
config dhcp pool netbios_name_server
Purpose Used to configure the IP address(es) for the Net BIOS name server,
Syntax
config dhcp pool netbios_name_server <pool_name 12> <ipaddr> {<ipaddr>}
{<ipaddr>}
Description This command is used to enter the IP address of a Net BIOS Name Server that will be
available to a Microsoft DHCP Client. This Net BIOS Name Server is actually a WINS
(Windows Internet Naming Service) Server that allows Microsoft DHCP clients to correlate
host names to IP addresses within a general grouping of networks. The user may establish up
to three Net BIOS Name Servers.
Parameters
<pool_name 12> − Enter the previously created pool name for which to set the Net BIOS
name server for DHCP clients.
<ipaddr> − Enter the IP address for the Net BIOS name server for this pool. Users may
specify up to three Net BIOS name servers.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the Net BIOS name server for the DHCP pool:
DGS-3627:admin# config dhcp pool netbios_name_server accounting 10.98.254.2
Command: config dhcp pool netbios_name_server accounting 10.98.254.2
Success.
DGS-3627:admin#
config dhcp pool netbios_node_type
Purpose Used to set the Net BIOS node type for the DHCP server.
Syntax
config dhcp pool netbios_node_type <pool_name 12> [broadcast | peer_to_peer |
mixed | hybrid]
Description This command is used to allow users to set the type of node server for the previously
configured Net BIOS Name server. The user has four choices for node types which are
Broadcast, Peer to Peer, Mixed and Hybrid.
Parameters
<pool_name 12> − Enter the previously created pool name for which to set the Net BIOS
node type for DHCP clients.
[broadcast | peer_to_peer | mixed | hybrid] – Users may choose the node type for the Net
BIOS from one of the four listed.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the Net BIOS node type for the DHCP pool:
DGS-3627:admin# config dhcp pool netbios_node_type accounting hybrid
Command: config dhcp pool netbios_node_type accounting hybrid
Success.
DGS-3627:admin#