Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
55
Command Parameters
config admin local_enable
Each command is listed, in detail, in the following sections.
enable password encryption
Purpose This command is used to enable password encryption.
Syntax
enable password encryption
Description The user account configuration information will be stored in the configuration file, and can be
applied to the system later.
If password encryption is enabled, the passwords will be in encrypted form.
When password encryption is disabled, if the user specifies the password in plain text form,
the password will be in plan text form. However, if the user specifies the password in
encrypted form, or if the password has been converted to encrypted form by the last enable
password encryption command, the password will always be in the encrypted form and can
not be reverted back to plaintext.
Parameters None
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable password encryption:
DGS-3627:admin# enable password encryption
Command: enable password encryption
DGS-3627:admin#
disable password encryption
Purpose This command is used to disable password encryption.
Syntax
disable password encryption
Description The user account configuration information will be stored in the configuration file, and can be
applied to the system later.
If password encryption is enabled, the passwords will be in encrypted form.
When password encryption is disabled, if the user specifies the password in plain text form,
the password will be in plan text form. However, if the user specifies the password in
encrypted form, or if the password has been converted to encrypted form by the last enable
password encryption command, the password will always be in the encrypted form and can
not be reverted back to plaintext.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable password encryption: