Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
465
DGS-3627:admin#debug stp show counter ports 9
Command: debug stp show counter ports 9
STP Counters
--------------------------------------
Port 9 :
Receive: Transmit:
Total STP Packets :32 Total STP Packets :32
Configuration BPDU :0 Configuration BPDU :0
TCN BPDU :0 TCN BPDU :0
RSTP TC-Flag :15 RSTP TC-Flag :7
RST BPDU :32 RST BPDU :32
Discarded:
Total Discard BPDU :0
Global STP Disable :0
Port STP Disabled :0
Invalid Packet Format :0
Invalid Protocol :0
Config BPDU Length :0
TCN BPDU Length :0
RST BPDU Length :0
Invalid Type :0
Invalid Timers :0
Success.
DGS-3627:admin#
debug stp clear counter
Purpose Used to clear STP counters.
Syntax
debug stp clear counter [ports < portlist > | all ]
Description This command used to clear the STP counters.
Parameters
ports <portlist> - Specifies the port range.
all - Clears all port counters.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To clear all STP counters on the switch:
DGS-3627:admin#debug stp clear counter all
Command : debug stp clear counter all
Success.
DGS-3627:admin#
debug stp state
Purpose Used to configure the STP debug state.
Syntax
debug stp state [enable | disable]
Description This command is used to enable or disable the STP debug state.