Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
464
debug stp show flag
Purpose Used to show the per-port STP debug level.
Syntax
debug stp show flag {ports <portlist>}
Description This command used to display the STP debug level on specified ports.
Parameters
ports <portlist> - Specifies the STP ports to display
If no parameter is specified, all ports on the switch will be displayed.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To display the debug STP levels on all ports:
DGS-3627:admin# debug stp show flag
Command: debug stp show flag
Global State: Enabled
Port Index Event flag BPDU Flag State Machine Flag
---------- ---------- --------- ------------------
1 Detail Brief Disable
2 Detail Brief Disable
3 Detail Brief Disable
4 Detail Brief Disable
5 Detail Brief Disable
6 Detail Brief Disable
7 Detail Brief Disable
8 Detail Brief Disable
9 Detail Brief Disable
10 Detail Brief Disable
11 Detail Brief Disable
12 Detail Brief Disable
Success.
DGS-3627:admin#
debug stp show counter
Purpose Used to show the STP counters.
Syntax
debug stp show counter { ports [ < portlist > | all ] }
Description This command used to display the STP counters.
Parameters
ports <portlist> - Specifies the STP ports for display..
all - Display all port’s counters
If no parameter is specified, display the global counters.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To show the STP counters for port 9: