Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
745
create wac user
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To create a WAC local user:
DGS-3627:admin# create wac user vlan Jim
Command: create wac user vlan Jim
Enter a case-sensitive new password:**
Enter the new password again for confirmation:**
Success.
DGS-3627:admin#
delete wac user
Purpose Used to delete a WAC local user.
Syntax
delete wac [user <username 15> | all_users]
Description The delete wac user command deletes WAC users from the local DB.
Parameters
user - To specify the user name to be deleted
all_users - All user accounts in local DB will be deleted.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a WAC local user:
DGS-3627:admin# delete wac user 123
Command: delete wac user 123
Success.
DGS-3627:admin#
config wac user
Purpose Used to configure WAC local user.
Syntax
config wac user <username 15> [vlan <vlan_name 32> | vlanid <vlanid 1-4094> |
clear_vlan]
Description The config wac user command updates the local user DB. Only created user can be
configured
Parameters
username - The user name to be configured
vlanid - Target VLAN ID for authenticated host which uses this user account to pass
authentication
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure WAC local user: