Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
18
reset
Purpose Used to reset the Switch to the factory default settings.
Syntax
reset {[config |system]} {<string>}
Description This command is used to restore the Switch’s configuration to the default settings assigned
from the factory.
Parameters
config − If the keyword ‘config’ is specified, all of the factory default settings are restored on
the Switch including the IP address, user accounts, and the switch history log. The Switch will
not save or reboot.
system − If the keyword ‘system’ is specified all of the factory default settings are restored on
the Switch. The Switch will save and reboot after the settings are changed to default.
Rebooting will clear all entries in the Forwarding Data Base.
If no parameter is specified, the Switch’s current IP address, user accounts, and the switch
history log are not changed. All other parameters are restored to the factory default settings.
The Switch will not save or reboot.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To restore all of the Switch’s parameters to its default values:
DGS-3627:admin# reset config
Command: reset config
Are you sure to proceed with system reset?(y/n) y
Success.
DGS-3627:admin#
login
Purpose Used to log in a user to the Switch’s console.
Syntax
login
Description This command is used to initiate the login procedure. The user will be prompted for a
Username and Password.
Parameters None.
Restrictions None.
Example usage:
To initiate the login procedure:
DGS-3627:admin# login
Command: login
UserName: