Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
560
DGS-3627:admin# show pim
Command: show pim
PIM Global State : Enabled
Last Hop SPT Switchover : Never
Register Probe Time : 5
Register Suppression Time : 60
PIM Interface Table
Designated Hello J/P
Interface IP Address Router Interval Interval Mode State
------------ ------------------ --------------- -------- -------- ----- --------
System 10.90.90.90/8 10.90.90.90 30 60 DM Disabled
Total Entries: 1
DGS-3627:admin#
show pim neighbor
Purpose Used to display PIM neighbors of the Switch.
Syntax
show pim neighbor {ipif <ipif_name12> | ipaddress <network_address>}
Description This command will display the PIM neighbor table for the Switch.
Parameters
<ipif_name 12> − Enter the name of the IP interface for which to display PIM
information regarding PIM neighbors.
ipaddress <network_address> − Enter the IP address of a PIM neighbor for which
to display information.
Adding no parameters to this command will display all PIM neighbors that probed
the Switch.
Restrictions None.
Example usage:
To view the PIM neighbors:
DGS-3627:admin# show pim neighbor
Command: show pim neighbor
PIM Neighbor Address Table
Interface Name Neighbor Address Expired Time
-------------------- ----------------- ------------
n10 10.20.6.251 79
Total Entries: 1
DGS-3627:admin#