Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
633
delete snmp user
Purpose This command is used to remove a user from an SNMP group and delete the associated
group in SNMP group.
Syntax
delete snmp user <username 32>
Description The delete snmp user command removes a user from a SNMP group and deletes the
associated group in SNMP group.
Note: This is SNMPv3 command, if it is used; All SNMPv1/v2 commands are not necessary.
Parameters
<username32> - The name of the user on the host that connects to the agent. The range is 1
to 32.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a SNMP user “user123”:
DGS-3627:admin# delete snmp user user123
Command: delete snmp user user123
Success.
DGS-3627:admin#
show snmp user
Purpose This command is used to display information on each SNMP username in the group
username table.
Syntax
show snmp user
Description The show snmp user command displays information on each SNMP username in the group
username table.
Note: This is SNMPv3 command, if it is used; All SNMPv1/v2 commands are not necessary.
Parameters None.
Restrictions None.
Example usage:
To show SNMP user:
DGS-3627:admin# show snmp user
Command: show snmp user
Username Group Name VerAuthPriv
-------------------------------- -------------------------------- -----------
initial initial V3 NoneNone
user123 group123 V3 MD5 DES
Total Entries : 2
DGS-3627:admin#
create snmp group
Purpose This command is used to create a new SNMP group, or a table that maps SNMP users to