Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
653
This example shows how to create an IPv6 subnet VLAN entry:
DGS-3627:admin# create subnet_vlan ipv6network FE80::/64 vlan v2 priority 2
Command: create subnet_vlan ipv6network FE80::/64 vlan v2 priority 2
Success.
DGS-3627:admin#
delete subnet_vlan
Purpose Use this command to delete subnet vlan entry.
Syntax
delete subnet_vlan [network <network_address> | ipv6network <ipv6networkaddr>] |
vlan <vlan_name 32> | vlanid <vidlist>| all]
Description This command is used to delete subnet vlan entry from switch. You can delete subnet vlan
entry by IP subnet or vlan, or delete all subnet vlan entries.
Parameters
network - To specify an IPv4 network address or IPv6 network addres. The format is
ipaddress / prefix length.
ipv6network - To specify an IPv6 network address. The format is ipaddress / prefix
length.The prefix length of IPv6 network address shall not be greater than 64.
vlan - If specify the vlan, all subnet vlan entries that associated with this vlan will be deleted.
vidlist - Specifies a list of VLANs by VLAN ID.
all - If specify all, all subnet vlan entries will be deleted.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
This example shows how to delete a subnet VLAN entry:
DGS-3627:admin# delete subnet_vlan network 172.168.1.0/24
Command:delete subnet_vlan network 172.168.1.0/24
Success.
DGS-3627:admin#
This example shows how to delete all subnet VLAN entries:
DGS-3627:admin# delete subnet_vlan all
Command:delete subnet_vlan all
Success.
DGS-3627:admin#
show subnet_vlan
Purpose Use this command to display subnet vlan entry information.
Syntax
show subnet_vlan {[network<network_address> | ipv6network <ipv6networkaddr>] |
vlan <vlan_name 32> | vlanid <vidlist>]}
Description This command is used to display subnet vlan entry information.
Parameters
network - To specify an IPv4 network address. If network address is not specifed, all subnet