Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
321
DGS-3627:admin# show router_ports
Command: show router_ports
VLAN Name : default
Static Router Port : 1-10
Dynamic Router Port :
Forbidden router port :
VLAN Name : vlan2
Static router port :
Dynamic router port :
Forbidden router port :
Total Entries : 2
DGS-3627:admin#
config mld_snooping
Purpose Used to configure MLD snooping on the switch.
Syntax
config mld_snooping [vlan_name <vlan_name 32> | vlanid <vlanid_list> | all]
{node_timeout <sec 1-16711450> | router_timeout <sec 1-16711450> | done_timer <sec
1-16711450> | state [enable | disable] | fast_done [enable | disable]}(1)
Description This command is used to configure MLD snooping on the switch.
Parameters
vlan_name - Specify the name of the VLAN for which MLD snooping is to be configured.
vlanid - Specify the ID of the VLAN for which MLD snooping is to be configured.
all - Specify all VLANs for which MLD snooping is to be configured.
node_timeout – Specify the node time-out value here.
router_timeout – Specify the router time-out value here.
done_timer – Specify the done timer here.
state - Enable or disable MLD snooping for the chosen VLAN.
fast_done - Enable or disable MLD snooping fast_leave function.
If enable, the membership is immediately removed when the system receive the MLD leave
message.
If the multicast router query includes requests only for MLDv1 reports, the switch forwards
only the first MLDv1 report from all hosts for a group to all the multicast routers.
If the multicast router query also includes requests for MLDv2 reports, the switch forwards all
MLDv2 reports for a group to the multicast devices.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure MLD snooping:
DGS-3627:admin# config mld_snooping vlan default state enable
Command: config mld_snooping vlan default state enable
Success.
DGS-3627:admin#
config mld_snooping querier
Purpose Used to configure the time in seconds between general query transmissions, the maximum
time in seconds to wait for reports from members, and the permitted packet loss that