Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
580
DGS-3627:admin# show per_queue bandwidth_control 1:10
Command: show per_queue bandwidth_control 1:10
Queue Bandwidth Control Table On Port: 1:10
Queue Min_Rate (64Kbit/sec) Max_Rate (64Kbit/sec)
---- --------------------- ----------------------
0 640 no_limit
1 640 no_limit
2 640 no_limit
3 640 no_limit
4 640 no_limit
5 no_limit no_limit
6 no_limit no_limit
DGS-3627:admin#
enable cpu_rx_rate_control
Purpose Used to set CPU receiving rate as predefined limit.
Syntax
enable cpu_rx_rate_control {<class_id 0-2>}
Description Used to set CPU receiving rate as predefined limit.
Parameters
<class_id 0-2> - Specifies which class of service to set. If not specified, all classes in the
range will be set.
Restrictions Only Administrator users can issue this command.
Example usage:
To set CPU receiving rate as predefined limit:
DGS-3627:admin# enable cpu_rx_rate_control
Command: enable cpu_rx_rate_control
Success.
DGS-3627:admin#
disable cpu_rx_rate_control
Purpose Used to set CPU receiving rate as no limit.
Syntax
disable cpu_rx_rate_control {<class_id 0-2>}
Description Used to set CPU receiving rate as no limit.
Parameters
<class_id 0-2> - Specifies which class of service to set. If not specified, all classes in the
range will be set.
Restrictions Only Administrator users can issue this command.
Example usage:
To set CPU receiving rate as no limit: