Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
691
DGS-3627:admin# enable sntp
Command: enable sntp
Success.
DGS-3627:admin#
disable sntp
Purpose To disable SNTP server support.
Syntax
disable sntp
Description
This will disable SNTP support. SNTP service must be separately configured (see config
sntp).
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example:
To disable SNTP support:
DGS-3627:admin# disable sntp
Command: disable sntp
Success.
DGS-3627:admin#
config time
Purpose Used to manually configure system time and date settings.
Syntax
config time <date ddmthyyyy> <time hh:mm:ss>
Description This will configure the system time and date settings. These will be overridden if SNTP is
configured and enabled.
Parameters
date – Express the date using two numerical characters for the day of the month, three
alphabetical characters for the name of the month, and four numerical characters for the
year. For example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is, two numerical characters
each for the hour using a 24-hour clock, the minute and second. For example: 19:42:30.
Restrictions Only Administrator and Operator-level users can issue this command. Manually configured
system time and date settings are overridden if SNTP support is enabled.
Example usage:
To manually set system time and date settings:
DGS-3627:admin# config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DGS-3627:admin#