Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
323
config mld_snooping mrouter_ports
Syntax
config mld_snooping mrouter_ports vlan <vlan_name 32> [add | delete] <portlist>
Description This command allows you to designate a range of ports as being connected to multicast-
enabled routers. This will ensure that all packets with such a router as its destination will
reach the multicast-enabled router, regardless of protocol, etc.
Parameters
vlan - Specify the name of the VLAN on which the router port resides.
add | delete - Specify to add or delete the router ports.
portlist - Specify a range of ports to be configured. (UnitID:port number)
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To set up static router ports:
DGS-3627:admin# config mld_snooping mrouter_ports default add 2:1-2:10
Command: config mld_snooping mrouter_ports default add 2:1-2:10
Success.
DGS-3627:admin#
config mld_snooping mrouter_ports_forbidden
Purpose Used to configure ports as forbidden router ports.
Syntax
config mld_snooping mrouter_ports_forbidden vlan <vlan_name 32> [add | delete]
<portlist>
Description This command allows you to designate a range of ports as being not connected to multicast-
enabled routers. This ensures that the forbidden router port will not propagate routing
packets out.
Parameters
vlan - Specify the name of the VLAN on which the router port resides.
add | delete - Specify to add or delete the router ports.
portlist - Specify a range of ports to be configured. (UnitID:port number)
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To set up port range 1-10 to forbidden router ports of the default VLAN:
DGS-3627:admin# config mld_snooping mrouter_ports_forbidden default add 1-10
Command: config mld_snooping mrouter_ports_forbidden default add 1-10
Success.
DGS-3627:admin#
enable mld_snooping
Purpose Used to enable MLD snooping on the switch.
Syntax
enable mld_snooping {forward_mcrouter_only}
Description This command allows you to enable MLD snooping on the switch. The
forward_mcrouter_only function is disabled by default. The enable mld_snooping