Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
385
disable jwac quarantine_server_monitor
Syntax
disable jwac quarantine_server_monitor
Description Disable JWAC Quarantine Server function enabled previously.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable Quarantine Server monitor function:
DGS-3627:admin# disable jwac quarantine_server_monitor
Command: disable jwac quarantine_server_monitor
Success.
DGS-3627:admin#
config jwac quarantine_server_error_timeout
Purpose Used to set Quarantine Server error timeout.
Syntax
config jwac quarantine_server_error_timeout <sec 5-300>
Description When Quarantine Server monitor is enabled, the JWAC Switch will periodically check if the
Quarantine works OK. If the Switch does not receive any response from Quarantine Server
during the configured error timeout, the Switch then regards it as working improperly.
Parameters
<sec 5-300> - To specify the error timeout interval.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To set Quarantine Server error timeout:
DGS-3627:admin# config jwac quarantine_server_error_timeout 60
Command: config jwac quarantine_server_error_timeout 60
Success.
DGS-3627:admin#
config jwac redirect
Purpose Used to configure redirect destination and delay time before an unauthenticated host is
redirect to Quarantine Server or JWAC login web page.
Syntax
config jwac redirect {destination [quarantine_server | jwac_login_page] | delay_time
<sec 0-10>} (1)
Description This command allows you to configure redirect destination and delay time before an
unauthenticated host is redirected to Quarantine Server or the JWAC login web page.
0 means no delaying the redirect.
Parameters
destination - To specify the destination which the unauthenticated host will be redirected to.
delay_time - To specify the time period after which the unauthenticated host will be
redirected. Unit of this timer is second.
Restrictions Only Administrator and Operator-level users can issue this command.