Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
493
show ospfv3 aggregation
Parameters
<area_id> - If it is set, only the aggregations that belong to this area will be displayed.
If it is not set, all aggregations will be displayed.
Restrictions None.
Example usage:
To display OSPFv3 area aggregations:
DGS-3627:admin# show ospfv3 aggregation
Command: show ospfv3 aggregation
OSPFv3 Area Aggregation Settings
Area ID Aggregated LSDB Advertise
Network Address Type
--------------- ------------------------------------------- -------- ---------
1.1.1.1 1000::/16 Summary Disabled
2.2.2.2 2000::/16 Summary Disabled
Total Entries: 2
DGS-3627:admin# show ospfv3 aggregation 2.2.2.2
Command: show ospfv3 aggregation 2.2.2.2
OSPFv3 Area Aggregation Settings
Area ID Aggregated LSDB Advertise
Network Address Type
--------------- ------------------------------------------- -------- ---------
2.2.2.2 2000::/16 Summary Disabled
Total Entries: 1
DGS-3627:admin#
show ospfv3 lsdb
Purpose Used to display OSPFv3 LSDB.
Syntax
show ospfv3 lsdb {area <area_id> | type [rtrlink | netlink | inter_area_prefix |
inter_area_router | asextlink | link_lsa | intra_area_prefix]}
Description This command is used to display the OSPFv3 LSDB.
Parameters
area - If it is set, only the LSAs that belong to this area will be displayed.
type - If it is set, only this type LSAs will be displayed and detail information for these LSAs
will be displayed at the same time. The type includes:
rtlink - Router LSA;
netlink - Network LSA.
inter_area_prefix - Inter-Area-Prefix LSA
inter_area_router - Inter-Area-Router LSA
asextlink - AS external LSA
link_lsa - Link LSA.
intra_area_prefix - Intra-Area-Prefix LSA.