Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
149
DGS-3627:admin# show bgp neighbors 172.16.232.178 received_routes
Command: show bgp neighbors 172.16.232.178 received_routes
BGP local router ID is 172.16.232.181
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
IP Address/Netmask Gateway Metric LocPrf Weight Path
------------------- --------------- ------- ------ ------ ------
*>i10.0.0.0 172.16.232.179 0 100 0 ?
*> 10.20.2.0 0.0.0.0 0 32768 i
Total Entries :2
DGS-3627:admin# show bgp neighbors 172.16.232.178 received_prefix_filter
Command: show bgp neighbors 172.16.232.178 received_prefix_filter
Ip prefix-list 172.16.232.181: 1 entries
Seq 5 deny 10.0.0.0/8 le 32
Total Entries :1
DGS-3627:admin#
DGS-3627:admin# show bgp neighbors 192.168.6.102 routes
Command: show bgp neighbors 192.168.6.102 routes
BGP local router ID is 10.0.40.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? – incomplete
IP Address/Netmask Gateway Metric LocPrf Weight Path
------------------- ----------- ------- ------ ------ --------------
*> 10.10.10.0/24 172.16.10.1 0 0 300 10 i
*> 10.10.20.0/24 172.16.10.1 0 0 300 10 i
* 10.20.10.0/24 172.16.10.1 0 0 300 10 i
*dh 30.10.1.1/24 172.3.3.2 100 50 200 20 i
Total Entries :4
DGS-3627:admin#
show bgp dampened_routes
Purpose This command is used to display dampened entries in the Border Gateway Protocol (BGP)
routing table.
Syntax
show bgp dampened_routes
Description The command is used to show dampened routes.
Parameters
dampened_routes - Displays the dampened routes
Restrictions None.
Example usage:
To show the BGP dampened route information: