Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
212
config dhcp pool default_router
Purpose Used to configure the default router for the DHCP client.
Syntax
config dhcp pool default_router <pool_name 12> <ipaddr> {<ipaddr>} {<ipaddr>}
Description This command is used to configure the default router for DHCP clients requesting DHCP
information for the switch. Users may add up to three IP addresses to identify the router, but
must specify at least one.
Parameters
<pool_name 12> − Enter the previously created pool name for which to add a default router.
<ipaddr> − Enter the IP address for the default router for this pool. Users may specify up to
three default routers but users must add at least one.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the default router:
DGS-3627:admin# config dhcp pool default_router accounting 10.245.32.1
Command: config dhcp pool default_router accounting 10.245.32.1
Success.
DGS-3627:admin#
config dhcp pool dns_server_address
Purpose Used to configure the IP addresses of DNS servers for a specific DHCP pool.
Syntax
config dhcp pool dns_server_address <pool_name 12> <ipaddr> {<ipaddr>} {<ipaddr>}
Description This command is used to configure the DNS server IP addresses for a specific DHCP pool for
the switch. The DNS Server correlates IP addresses to host names when queried. Users may
add up to three DNS Server addresses.
Parameters
<pool_name 12> − Enter the previously created pool name for which to add a DNS address.
<ipaddr> − Enter the IP address for the DNS server for this pool. Users may specify up to
three DNS servers.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the DNS server address foe a DHCP pool:
DGS-3627:admin# config dhcp pool dns_server_address accounting 10.245.32.1
Command: config dhcp pool dns_server_address accounting 10.245.32.1
Success.
DGS-3627:admin#