Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
215
config dhcp pool network_addr
Purpose Used to configure the network address and corresponding subnet mask for the DHCP pool.
Syntax
config dhcp pool network_addr <pool_name 12> <network_address>
Description This command will allow users to enter the IP address pool to be assigned to requesting
DHCP Clients. This address will not be chosen but the first 3 sets of numbers in the IP address
will be used for the IP address of requesting DHCP Clients. (ex. If this entry is given the IP
address 10.10.10.2, then assigned addresses to DHCP Clients will resemble 10.10.10.x,
where x is a number between 1 and 255 but does not include the assigned 10.10.10.2)
Parameters
<pool_name 12> − Enter the previously created pool name for which to set the network
address.
<network_address> − IP address and netmask that is the address of this DHCP pool. The
address and mask information can be specified using the traditional format (for example,
10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the network address for the DHCP pool:
DGS-3627:admin# config dhcp pool network_addr accounting 10.1.1.1/8
Command:config dhcp pool network_addr accounting 10.1.1.1/8
Success.
DGS-3627:admin#
config dhcp pool next_server
Purpose Used to configure the IP address of the server that has the boot file for the DHCP pool.
Syntax
config dhcp pool next_server <pool_name 12> <ipaddr>
Description This command is used to configure the IP address of the server that has the boot file for the
DHCP pool.
Parameters
<pool_name 12> − Enter the previously created pool name for which to set the next server.
<ipaddr> − Enter the IP address of the next server which has the boot file.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the IP address of the next server:
DGS-3627:admin# config dhcp pool next_server accounting 10.99.88.77
Command: config dhcp pool next_server accounting 10.99.88.77
Success.
DGS-3627:admin#