Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
227
DGS-3627:admin# debug dhcpv6_relay state enable
Command: debug dhcpv6_relay state enable
Success.
DGS-3627:admin#
debug dhcpv6_relay output
Purpose This command is used to set the debug message to output to a buffer or a console.
Syntax
debug dhcpv6_relay output [buffer | console]
Description This command is used to set the debug message to output to a buffer or a console.
Parameters
output - See below:
buffer - Let the debug message output to buffer.
console - Let the debug message output to console.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To set debug information to output to a console:
DGS-3627:admin# debug dhcpv6_relay output console
Command: debug dhcpv6_relay output console
Success.
DGS-3627:admin#
debug dhcpv6_relay packet
Purpose This command is used to enable or disable the debug information flag of the DHCPv6 relay
packet, including packets receiving and sending.
Syntax
debug dhcpv6_relay packet {all | receiving | sending} state [enable | disable]
Description This command is used to enable or disable the debug information flag of the DHCPv6 relay
packet, including packets receiving and sending.
Parameters
all - Set packet receiving and sending debug flags.
receiving - Set packet receiving debug flag.
sending - Set packet sending debug flag.
enable - Enable the designated flags.
disable - Disable the designated flags.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enabled the DHCPv6 relay packet sending debug: