Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
134
DGS-3627:admin# create bgp neighbor peer_group local1
Command:4#create bgp neighbor peer_group local1
Success.
DGS-3627:admin# create bgp neighbor 10.2.2.2 remote_as 10
Command:4#create bgp neighbor 10.2.2.2 remote_as 10
Success.
DGS-3627:admin# config bgp peer_group local1 add 10.2.2.2
Command:4#config bgp peer_group local1 add 10.2.2.2
Success.
DGS-3627:admin# show bgp peer_group local1
Command:4#show bgp peer_group local1
BGP Peer Group :local1
-----------------------------------------------------------------------
Description :
Session State : Enabled
Session Activity : Enabled
Members : 10.2.2.2
Remote AS : Not Set
Advertisement Interval : 30 seconds
Keepalive Interval : 60 seconds.
Holdtime Interval : 180 seconds.
AS Origination Interval : 15 seconds
Connect Retry Interval : 120 seconds
EBGP Multihop : 1
Weight : 0
Update Source : ipif1
Next Hop Self : Disabled
Route Reflector Client : Disabled
Send Community : None
Remove Private As : Disabled
AllowAS In : Disabled
Soft Reconfiguration Inbound :Disabled
Unsuppressed Map : usmap1
Default Originate : Disabled
Incoming Update Prefix List : prelist1
Incoming Update Filter List : ASlist1
Route Map for outgoing Routes : routemap1
Outbound Route Filter (ORF) type (64) Prefix-list:
Send Mode : Enabled
Receive Mode : Disabled
Prefix Max Count : 12000
Prefix Warning Threshold : 75
Prefix Warning Only : Disabled
DGS-3627:admin#
config bgp route_reflector cluster_id
Purpose This command is used to configure the BGP process’s global attribute.
Syntax
config bgp route_reflector cluster_id <ipaddr>