Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
328
DGS-3627:admin# show mld_snooping forwarding
Command: show mld_snooping forwarding
VLAN Name : default
Source IP : 2001::1
Multicast Group: FE1E::1
Port Member : 2,7
VLAN Name : default
Source IP : 2001::2
Multicast Group: FF1E::1
Port Member : 5
Total Entries : 2
DGS-3627:admin#
show mld_snooping mrouter_ports
Purpose Used to display the currently configured router ports on the switch.
Syntax
show mld_snooping mrouter_ports vlan <vlan_name 32> {[static | dynamic |
forbidden]}
Description This command displays the currently configured router ports on the switch.
Parameters
vlan - Specify the name of the VLAN on which the router port resides.
vlanid - Specify the ID of the VLAN on which the router port resides.
all - Specify all VLANs on which the router port resides.
static - Displays router ports that have been statically configured.
dynamic - Displays router ports that have been dynamically configured.
forbidden - Displays forbidden router ports that have been statically configured.
If no parameter is specified, the system will display all currently configured router ports on the
switch.
Restrictions None.
Example usage:
To display the mld_snooping router ports:
DGS-3426P:admin#show mld_snooping mrouter_ports
Command: show mld_snooping mrouter_ports
VLAN Name : default
Static mrouter port :
Dynamic mrouter port : 1-10
Forbidden mrouter port:
Total Entries: 1
DGS-3627:admin#