Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
516
DGS-3627:admin# delete ospf virtual_link 10.1.1.2 20.1.1.1
Command: delete ospf virtual_link 10.1.1.2 20.1.1.1
Success.
DGS-3627:admin#
show ospf virtual_link
Purpose Used to display the current OSPF virtual interface configuration.
Syntax
show ospf virtual_link {<area_id> <neighbor_id>}
Description This command will display the current OSPF virtual interface configuration.
Parameters
<area_id> − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely
identifies the OSPF area in the OSPF domain.
<neighbor_id> − The OSPF router ID for the remote area. This is a 32-bit number in the form of
an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the remote area’s Area Border Router.
This is the router ID of the neighbor router.
Restrictions None.
Example usage:
To display the current OSPF virtual interface configuration:
DGS-3627:admin# show ospf virtual_link
Command: show ospf virtual_link
Virtual Interface Configuration
Transit Virtual Hello Dead Authentication Link
Area ID Neighbor Router Interval Interval Status
--------------- --------------- -------- -------- -------------- ------
10.0.0.0 20.0.0.0 10 60 None DOWN
Total Entries: 1
DGS-3627:admin#