Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
32
Command Parameters
enable 802.1x
disable 802.1x
create 802.1x user < username 15 >
delete 802.1x user < username 15 >
show 802.1x user
config 802.1x auth_protocol [ local | radius_eap ]
config 802.1x fwd_pdu system [ enable | disable ]
config 802.1x fwd_pdu ports [ < portlilst > | all ] [ enable | disable ]
config 802.1x authorization network
radius
[ enable | disable ]
show 802.1x { [ auth_state | auth_configuration ] ports { < portlist > } }
config 802.1x capability ports [ < portlist > | all ] [ authenticator | none ]
config 802.1x max_users [<value 1 – 4000> | no_limit]
config 802.1x auth_parameter ports [ <portlist> | all ][ default |{ direction [ both | in ]| port_control [ force_unauth |
auto | force_auth ] | quiet_period < sec 0-65535> | tx_period < sec 1-65535> |
supp_timeout < sec 1-65535>| server_timeout < sec 1-65535> | max_req <
value 1-10> | reauth_period < sec 1-65535> | enable_reauth [ enable | disable ] |
max_users [ < value 1 – 128 > | no_limit ]} (1)]
config 802.1x auth_mode [ port_based | mac_based ]
config 802.1x init [ port_based ports [ < portlist | all > ] | mac_based ports [ < portlist > | all ] {
mac_address < macaddr > }]
config 802.1x reauth [ port_based ports [ < portlist | all >]| mac_based ports [ < portlist > | all ] {
mac_address < macaddr > }]
create 802.1x guest_vlan { < vlan_name 32 > }
delete 802.1x guest_vlan { < vlan_name 32 > }
config 802.1x guest_vlan ports [ < portlist > | all ] state [ enable | disable ]
show 802.1x guest_vlan
config radius add < server_index 1-3 > [ < server_ip > | < ipv6addr > ] key < passwd 32 > [ default
| { auth_port < udp_port_number 1-65535 > | acct_port < udp_port_number 1-
65535 > | timeout < int 1-255 > | retransmit < int 1-20 > } (1)]
config radius delete < server_index 1-3 >
config radius <server_index 1-3> { ipaddress [ <server_ip> | <ipv6addr> ] | key <passwd 32> |
auth_port [<udp_port_number>| default ] | acct_port [ <udp_port_number> |
default ] | timeout [ <int 1-255> | default ] | retransmit [ <int 1-20> | default ]} (1)
show radius
show auth_statistics {ports [<portlist> | all]}
show auth_diagnostics {ports [<portlist> | all]}
show auth_session_statistics {ports [<portlist> | all]}
show auth_client
show acct_client
config accounting service [ network | shell | system ] state [ enable | disable ]
show accounting service