Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
525
debug ospf show redistribution
Purpose Used to display the current internal OSPF redistribute list. This command can be used if the
external route advertising is not correct.
Syntax
debug ospf show redistribution
Description This command is used to display the current internal OSPF redistribute list.
Parameters None.
Restrictions Only Administrator level users can issue this command.
Example usage:
To display the current OSPF redistribution list:
DGS-3627:admin# debug ospf show redistribution
Command: debug ospf show redistribution
OSPF Redistribution List:
IP Nexthop State Type Tag
------------------ --------------- ----- ---- ---------------
1.1.1.0/24 0.0.0.0 ON 2 0.0.0.0
OSPF ASE Table:
IP Nexthop State Type Tag
------------------ --------------- ----- ---- ---------------
1.1.1.0/24 0.0.0.0 ON 2 0.0.0.0
DGS-3627:admin#
debug ospf show summary_list
Purpose It is used to display the current internal OSPF summary list. This command can be used if
one or more OSPF neighbors state stay at ExStart or Exchange.
Syntax
debug ospf show summary_list
Description This command is used to display the current internal OSPF summary list.
Parameters None.
Restrictions Only Administrator level users can issue this command.
Example usage:
To display the current OSPF summary list: