Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
226
enable dhcpv6_relay
Syntax
enable dhcpv6_relay
Description This command is used to enable the DHCPv6 relay global state on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the DHCPv6 relay global state to enable:
DGS-3627:admin# enable dhcpv6_relay
Command: enable dhcpv6_relay
Success.
DGS-3627:admin#
disable dhcpv6_relay
Purpose Used to disable the DHCPv6 relay function on the Switch
Syntax
disable dhcpv6_relay
Description This command is used to disable the DHCPv6 relay global state on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the DHCPv6 relay global state to disable:
DGS-3627:admin# disable dhcpv6_relay
Command: disable dhcpv6_relay
Success.
DGS-3627:admin#
debug dhcpv6_relay state
Purpose This command is used to enable or disable DHCPv6 relay debug functions.
Syntax
debug dhcpv6_relay state [enable | disable]
Description This command is used to enable or disable DHCPv6 relay debug functions.
Parameters
state - See below:
enable - Enable the DHCPv6 relay debug function
disable - Disable the DHCPv6 relay debug function
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enabled the DHCPv6 relay debug function: