Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
124
config bgp peer_group
from the peer group. The following is a list of them:
capability_orf_prefix_list
next_hop_self
route_reflector_client
send_community
soft_reconfiguration_inbound
remove_private_as
allowas_in
holdtime
keepalive
unsuppress_map
filter_list for out direction
route_map for out direction
prefix_list for out direction
AS Orginate timer
Connect timer
On the contrary, some attributes or actions are allowed to be configured from both the peer
group and the member. If they are configured from the member, the setting will overwrite the
setting configured from the peer group.
Other attributes that can be set from an individual peer are as follows:
description,
filter_list for in direction,
route_map for in direction,
prefix_list for in direction,
ebgp_multihop,
session state,
session activity,
weight.
default_originate.
update_source.
As for the above attributes, setting the attribute of a peer group will automatically affect the
setting for individual peers in the peer group.
If Users configure the peer group’s session state to disable, all the peer group members
session state can’t be set to enable. Users can’t set the peer group’s session activity to
disable.
As for the description attribute, setting the peer group will not affect the setting for an
individual peer.
Parameters
<peer_group_name> - This is the name of the BGP peer group. The length is up to 16 bytes.
<ipaddr> - The IP address to be added or deleted.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a member from the peer group named “local”: