Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
19
logout
Purpose Used to log out a user from the Switch’s console.
Syntax
logout
Description This command terminates the current user’s session on the Switch’s console.
Parameters None.
Restrictions None.
Example usage:
To terminate the current user’s console session:
DGS-3627:admin# logout
show device_status
Purpose Used to display the current status of the hardware of the Switch.
Syntax
show device_status
Description This command displays the current status of the power and fans on the system. In the fan
status display there are fans on the left of the switch, on the right, at the back and a CPU fan,
if the fans are working normally the display will read “OK” in the fan field. If any of the fans fail
the corresponding field will read ‘Fail’.
Parameters None.
Restrictions None.
Example usage:
To show the device status of the Switch:
DGS-3627:admin# show device_status
Command: show device_status
Unit 1:
Internal Power: Active
External Power: Fail
Left Fan : OK
Right Fan : OK
Back Fan : OK
CPU Fan : OK
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
config command_prompt
Purpose Used to configure the command prompt for the Command Line Interface.
Syntax
config command_prompt [<string 16> | username | default]
Description This command is used to configure the command prompt for the CLI interface of the Switch. The
current command prompt consists of “product name + : + user level + product name” (ex. DGS-
3627:admin# ). The user may replace all parts of the command prompt, except the # by entering
a string of 16 alphanumerical characters with no spaces, or the user may enter the current login