Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
460
61
MSTP DEBUG ENHANCEMENT COMMANDS
The MSTP Debug Enhancement commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
debug buffer utilization | dump | clear | upload_toTFTP <ipaddr> <path_filename 64>]
debug output module mstp [buffer | console]
debug stp config ports [ < portlist > | all ] [ event | bpdu | state_machine | all ] state [ disable | brief |
detail ]
debug stp show information
debug stp show flag {ports <portlist>}
debug stp show counter {ports [<portlist> | all]}
debug stp clear counter [ports < portlist > | all ]
debug stp state [enable | disable]
Each command is listed, in detail, in the following sections.
debug buffer
Purpose Use the debug buffer command to dump, clear, or upload the debug buffer to the TFTP
server.
Syntax
debug buffer [utilization | dump | clear | upload_toTFTP <ipaddr> <path_filename 64>]
Description Dump, clear or upload the debug buffer to a TFTP server.
Parameters
dump - Displays the debug message in the debug message buffer.
clear - Clears the debug message buffer.
upload_toTFTP <ipaddr> - Uploads the debug message buffer to a TFTP server with a
specified IP address
<path_filename 64> - Upload the debug message buffer to a TFTP server and name the
uploaded file using the string identified in the <path_filename 64> option.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To clear the debug information in the buffer:
DGS-3627:admin# debug buffer clear
Command: debug buffer clear
Success.
DGS-3627:admin#