Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
318
To display all the IGMP snooping static groups:
DGS-3627:admin# show igmp_snooping static_group
Command: show igmp_snooping static_group
VLAN ID/Name IP Address Static Member Ports
-------------- ------------------ ------------------------
1 / Default 239.1.1.1 2:9-2:10
Total Entries : 1
DGS-3627:admin#
To display the IGMP snooping information for the default VLAN:
DGS-3627:admin# show igmp_snooping vlan default
Command: show igmp_snooping vlan default
IGMP Snooping Global State : Disabled
Multicast router Only : Disabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Router Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
Fast Leave : Disabled
Report Suppression : Disabled
Version : 3
Total Entries: 1
DGS-3627:admin#
show igmp_snooping group
Purpose Used to display the current IGMP snooping group configuration on the switch.
Syntax
show igmp_snooping group {vlan <vlan_name 32>}
Description This command displays the current IGMP snooping group configuration on the switch.
Parameters
vlan - Specify the name of the VLAN for which you want to view IGMP snooping group
information.
If VLAN, ports and IP address are not specified, the system will display all current IGMP
snooping group information.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To show IGMP snooping groups: