Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
559
DGS-3627:admin# config pim cbsr bootstrap_period 60
Command: config pim cbsr bootstrap_period 60
Success.
DGS-3627:admin#
show pim cbsr
Purpose Used to display the Candidate BSR settings of the switch, along with CBSR parameters
configured for the Switch.
Syntax
show pim cbsr {ipif <ipif_name12>}
Description This command will display the settings for Candidate BSRs that are accessible to the switch.
This command is for PIM-SM configurations only.
Parameters
<ipif_name 12> − Enter the name of the IP interface for which to display settings. Entering
no name will display all CBSRs.
Restrictions None.
Example usage:
To view the CBSR settings:
DGS-3627:admin# show pim cbsr
Command: show pim cbsr
PIM Candidate-BSR Table
C-BSR Hash Mask Len : 30
C-BSR Bootstrap Period : 2
Interface IP Address Priority
--------------------- --------------------- ------------
Zira 11.1.1.1/8 4
System 10.53.13.30/8 -1 (Disabled)
Total Entries: 2
DGS-3627:admin#
show pim
Purpose Used to display the PIM settings, along with PIM parameters configured for the Switch.
Syntax
show pim {ipif <ipif_name12>}
Description This command will display the settings for the PIM function that are accessible to the switch.
Parameters
<ipif_name 12> − Enter the name of the IP address for which to display settings. Entering no
name will display all PIM IP interfaces.
Restrictions None.
Example usage:
To view the PIM settings: