Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
513
show ospf ipif
Description This command will display the current OSPF interface settings for the specified interface
name.
Parameters
<ipif_name 12> − The IP interface name for which to display the current OSPF interface
settings.
all – Choosing this parameter will display the OSPF settings for all IP interfaces on the
Switch.
Restrictions None.
Example usage:
To display the current OSPF interface settings, for a specific OSPF interface:
DGS-3627:admin# show ospf ipif System
Command: show ospf ipif System
Interface Name: System IP Address: 172.18.70.105/21 (Link Up)
Network Medium Type: BROADCAST Metric: 1
Area ID: 0.0.0.0 Administrative State: Disabled
Priority: 1 DR State: DOWN
DR Address: None Backup DR Address: None
Hello Interval: 10 Dead Interval: 40
Transmit Delay: 1 Retransmit Time: 5
Authentication: None
Passive Mode: Disabled
Total Entries: 1
DGS-3627:admin#
show ospf all
Purpose Used to display the current OSPF settings of all the OSPF interfaces on the Switch.
Syntax
show ospf all
Description This command will display the current OSPF settings for all OSPF interfaces on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the current OSPF interface settings, for all OSPF interfaces on the Switch: