Filter
Top Products
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
627
DGS-3627:admin# disable sflow
Command: disable sflow
Success.
DGS-3627:admin#
show sflow
Purpose Show the sFlow information.
Syntax
show sflow
Description This command is used to show the sFlow information.
sFlow Address: The IPv4 address associated with this agent.
sFlow AddressV6: The IPv6 address associated with this agent.
sFlow State: The current state of the sFlow agent.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To show the sFlow information:
DGS-3627:admin# show sflow
Command: show sflow
sFlow Version : V5
sFlow Address : 10.90.90.90
sFlow AddressV6 : FE80::285:43FF:FE26:3101
sFlow State : Enabled
DGS-3627:admin#
show sflow flow_sampler
Purpose Used to displaythe the sFlow flow_sampler information of ports which have been created.
Syntax
show sflow flow_sampler
Description This command is used to show the sFlow flow_sampler configured for ports. The actual value
rate is 256 times the displayed rate value. There are two types of rates. The Configured Rate
is configured by the user. In order to limit the number of packets sent to the CPU when the
rate of traffic to the CPU is high, the sampling rate will be decreased. This is specified as the
active rate.
Parameters None.
Restrictions None.
Example usage:
To show the sFlow flow_sampler information of ports which have been created: