Filter
Top Products
XSCF>
showstatus
XSCF>
showhardconf
XSCF>
showdate
XSCF>
setdate -s 102016592013.00
If there is no problem, nothing is displayed.
14.
Execute the sho w hard conf command t o confirm th e hardware configuration
and t h e status of each CPU memory un it.
Confirm that no asterisk (*) is displayed in front of each component.
15.
Execute the sho w date command to confirm the XSCF time.
There is no need to set the time if the NTP server is set to the XSCF. Proceed to
step 17.
16.
If the XSCF t im e is different fro m the current time, execute the s etdate
command to set the time.
Specify the time in either of the following formats:
yyyy.MM.DD-hh:mm:ss year.month.day-hour (24-hour clock):minute:second
MMDDhhmmyyyy.ss monthdayhour (24-hour clock) minuteyear.second
In the following example, "October 20, 2013 16:59:00" is specified.
17.
Close t h e rack d oor.
Chapter 7 Maintaining the CPU Memory Units 157