Filter
Top Products
Caution -
Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see "1.5 Notes
Regarding Static Electricity."
Enable the removal of the crossbar cables (optical) before attempting to remove them.
For details, see "25.3 Enabling the Removal of a Crossbar Cable (Optical)."
1.
Remove th e two c rossb ar cables (o ptical) f rom the S PAR C M10-4S.
Remove the crossbar cable (optical) by holding the tab (A in the figure) of the
cable and pulling it straight in the direction of the arrow. At this time, do not
hold the cable part when pulling the crossbar cable. Pulling the cable part
without the connector lock completely released may cause damage.
Figure 25-5
Removing the crossbar cables (optical) (SPARC M10-4S)
2.
Remove th e other pair of crossb ar cables (optical) f rom the cro ssbar box.
Remove the crossbar cable (optical) by holding the tab (A in the figure) of the
cable and pulling it straight in the direction of the arrow. At this time, do not
hold the cable part when pulling the crossbar cable. Pulling the cable part
without the connector lock completely released may cause damage.
Chapter 25 Maintaining the Crossbar Cables (Optical) 395