Filter
Top Products
Caution -
Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see "1.5 Notes
Regarding Static Electricity."
A
19.4 Removing a Fan Unit
This section describes the procedure for removing a fan unit.
Enable the removal of the fan unit before attempting to remove it. For details, see
"19.3 Enabling the Removal of a Fan Unit."
19.4.1 Accessing a fan unit
1.
Remove the front cover.
For details, see "5.5.3 Removing the front cover."
19.4.2 Removing a fan unit
1.
Pull o ut the fan unit while raising the lever (A in the figure) of the fan unit.
Figure 19-2
Lever of fan unit
2.
Carefully remove the fan unit from i ts slot.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 2013332