Filter
Top Products
Table 2-4
Functions of the power switch
Icon Operation Description
Brief press
(For 1 second or
more and less than 4
seconds)
If the system has been
started in Service mode (*):
Operation is ignored.
If the system is stopped in
Service mode:
Operation is ignored.
If the system has been
started in Locked mode (*):
Operation is ignored.
If the system is stopped in
Locked mode:
Starts the system.
At this time, if a wait time for the air conditioning
facilities or a warm-up time is set on the XSCF,
the processing for waiting for the power-on of the
air conditioning facilities and the completion of
warm-upisomitted.
Long press
(For 4 seconds or
more)
If the system has been
started in Service mode (*):
Perform the system shutdown process to stop the
system.
If the system startup
processisinprogressin
Service mode:
Cancels the system startup process and then
stops the system.
If the system stop process
is in progress in Service
mode:
Continues the system stop process.
If the system is stopped in
Service mode:
Operation is ignored.
Even a long press does not start the system.
If the system is stopped in
Locked mode:
Starts the system.
If a wait time for the air conditioning facilities or
a warm-up time is set on the XSCF, the
processing for waiting for the power-on of the air
conditioning facilities and the completion of
warm-upisomitted.
If the system is not
stopped in Locked mode:
Operation is ignored.
*: If the system has been started, it means that at least one physical partition has been powered on.
Table 2-5
Functions of the mode switch
Function Mode switch
Locked Service
Starting/Stopping the system
by the power switch
Only system startup is enabled. A long press
shuts down the
system.
Table 2-5 describes the functions of the mode switch.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 201322