Filter
Top Products
Note -
Place the removed fan unit on a grounded antistatic ESD mat.
Note -
Do not force the fan unit into the slot. Using excessive force may damage the
component or the chassis.
Note -
Check that the fan unit is fully inserted and secured.
19.5 Installing a Fan Unit
This section describes the procedure for installing a fan unit.
19.5.1 Installing a fan unit
1.
Carefully insert the fan unit into its slot.
2.
Push the fan unit fully h o m e.
19.5.2 Restoring the chassis
1.
Install the front cover.
For details, see "6.5.3 Installing the front cover."
19.6 Restoring the System
This section describes the procedure for restoring the system after installing a fan
unit. The restoration procedure differs depending on the maintenance type as follows:
■
Active/Hot maintenance
■
Inactive/Hot maintenance
■
System-stopped maintenance
Chapter 19 Maintaining the Fan Units of the Crossbar Box 333