Filter
Top Products
Note -
Remove the fan shelf while paying careful attention to the two cables arranged in the
center.
Note -
Place the removed fan shelf on a grounded antistatic ESD mat.
Figure 28-15
Removing the cables
6.
Loosen the three screws securing the fan sh elf and partially pull out the fan
shelf.
Figure 28-16
Removing the fan shelf
7.
Place a ha nd under the f an s helf to support it and then carefully remove it
from th e chassis.
8.
Remove the cable connecting the fan backplane fro m the c onn ector.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual
･
December 2013438