Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
104
5.1.1.14 ether startup
Function Set the offline status when it is started up.
Available Model XG0224 / XG0448 / XG2600
Syntax ether <number> startup <mode>
Options
<number>
•
ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<mode>
•
online
The port starts operation in the online state during device startup or during dynamic
definition reflection.
• offline
The port starts operation in the offline state during device startup or during dynamic
definition reflection. Also, wait for an offline release instruction from operator.
Use Mode Configuration mode (admin class)
Explanation Set the port in offline state during device startup or during reflection of dynamic
definitions.
During device startup or during change of dynamic definitions, the relationship between
the Ethernet port state and the port offline state is as follows.
Caution If ports are offline, release them with the "online" command with port releasing.
Default It is assumed that forcible offline processing to the port is not performed during device
startup or during reflection of dynamic definitions.
<mode>
Ether port state during device startup or dynamic definitions change
Linkup possible Linkup impossible Port offline
online Linkup or Communication
possible
Linkdown or
Communication
impossible
Communication
impossible
staying in offline state
offline Communication
impossible
entering offline state
Communication
impossible
entering offline state
Communication
impossible
staying in offline state
ether startup online