Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
94
5.1.1.5 ether duplex
Function Set the full-duplex or half-duplex link mode.
Available Model XG0224 / XG0448
Syntax ether <number> duplex <duplex>
Options
<number>
•
ether port number
Set a port number to use with a decimal value. When setting multiple port numbers,
separate them with commas (,). When setting sequential numbers, separate them with
hyphens (-). (Example: "11-16")
<duplex>
Full-duplex or half-duplex link mode.
• full
Operates in full-duplex fixed link mode.
• half
Operates in half-duplex fixed link mode.
This option can be specified only when a fixed link speed has been specified by the
"ether mode" command. (This option setting is made invalid if the link speed has been
set to "auto".)
Use Mode Configuration mode (admin class)
Explanation Set the full-duplex or half-duplex link mode on the Ethernet port.
Caution
•
If "1000" is specified in the "ether mode" command, this command setting is disabled
and the system operates in full-duplex link mode.
• If "auto" is specified in the "ether mode" command, this command setting is disabled
and the system operates depending on the result autonegotiated with the connected
device.
Default It is assumed that full-duplex link mode has been specified.
Range Model
1 to 24 XG0224
1 to 48 XG0448
ether <number> duplex full