Filter
Top Products
XG Series User's Guide Chapter 6 Managing the Device
Verifying the Device Operations
552
slot2_temp
temperature around Expansion Card (SLOT2).
At the time of three following states, "--" is displayed.
The Expantion Card without Thermal Sensor is installed. (CX4)
The Invalid Expantion Card is installed.
The Expantion Card is not installed.
9) Slot Information
The type of Expansion Card.
SJ10GCX4Z : Installed Expansion Card is SJ10GCX4A. (CX4)
SJ10GSFPZ : Installed Expansion Card is SJ10GSFPA. (SFP+)
NO_PRESENT : The Expantion Card is not installed.
UNKNOWN : Installed Expansion Card is Invalid Card.
10) power_consumption
Power consumption of the device.
XG2600
1) Current time
Present date and time.
2) Startup time
Date and time when the system started up.
3) restart_cause
Cause for the system startup.
The following system startup causes are displayed:
power on : The power has been turned on.
reset : The reset command has been issued.
reset switch : The [RESET] switch has been pressed.
system down : System-down has occurred.
4) machine_state
State of the device
RUNNING : The device is active.
FALLBACK : The device is into fallback state.
# show system status
Current-time : Thu Dec 21 16:04:50 2008 ---(1)
Startup-time : Thu Dec 21 16:04:36 2008 ---(2)
restart_cause : power on ---(3)
machine_state : RUNNING ---(4)
access_direction : front access ---(5)
power_redundancy : redundant ---(6)
PSU1 state : NORMAL ---(7)
PSU2 state : NORMAL
PSU1 type : AC ---(8)
PSU2 type : AC
power_consumption : 75 W ---(9)
FAN1 state : NORMAL ---(10)
FAN2 state : NORMAL
inspiration_state : NORMAL
inspiration_temp : NORMA ---(11)
warning time : Fri Dec 26 14:00:45 2008 ---(12)
recover time : Fri Dec 26 14:12:30 2008
internal_state : NORMAL
inspiration_temp : 35 C ---(13)
internal_temp : 32 C