Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
111
5.1.1.21 linkaggregation mode
Function Set the link aggregation operation mode.
Available Model XG0224 / XG0448 / XG2600
Syntax linkaggregation <group> mode <la_mode>
Options
<group>
•
Link aggregation group number
Set a link aggregation group number with a decimal number.
<la_mode>
•
Link aggregation operation mode
Set the following operation mode.
static : Static operation
active : Dynamic operation with LACP enabled by "active".
passive : Dynamic operation with LACP enabled by "passive".
Use Mode Configuration mode (admin class)
Explanation Set an operation mode of the link aggregation.
If static is specified, the static link aggregation without LACP is configured.
If active or passive is specified, the dynamic link aggregation that uses the LACP is set.
If the active mode is specified, the LACPDU's cyclic transmission is automatically sent to
the remote LACP device.
If the passive mode is specified, the LACPDU's cyclic transmission starts only when an
LACPDU is received from the remote LACP. In other words, no link aggregation is
configured if both devices are in the passive mode.
Default It is assumed that the static operation mode has been set for the link aggregation.
Range Model
1 to 13 XG0224
1 to 26 XG0448
1 to 10 XG2600
linkaggregation <group> mode static