Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
LAN Information Settings
185
5.5.1.3 lan ip route
Function Set the IPv4 static route information.
Available Model XG0224 / XG0448 / XG2600
Syntax lan [<number>] ip route <count> <address>/<mask> <next_hop> [<distance>]
Options
<number>
•
lan definition number
Specify a lan definition serial number with a decimal value.
The default is 0.
<count>
•
Static route information definition number
Specify a static route information definition number with a decimal value.
<address>/<mask>
•
IPv4 address/number of mask bits (or mask value)
Specify a destination network with a combination of the IPv4 address and the number
of mask bits.
For the mask value, specify successive 1s following the most significant bit (MSB).
The available description format is as follows:
- IPv4 address/number of mask bits (Example: 192.168.1.0/24)
- IPv4 address/mask value (Example: 192.168.1.0/255.255.255.0)
• default
Specify it when the default route is set as a destination network.
Specifying 0.0.0.0/0(0.0.0.0/0.0.0.0) has the same meaning.
<next_hop>
•
IPv4 address of next_hop router
Specify the IPv4 address of the next_hop router to send packets to the destination
network.
<distance>
•
Priority
Specify the static route information priority with a decimal value from 1 to 254.
A smaller value has a higher priority.
The default is 1.
Use Mode Configuration mode (admin class)
Explanation
Set the IPv4 static route information.
Up to 4 IPv4 static route information can be defined for the product as a whole.
Caution Default routes can not be set with same priority.
Default It is assumed that the IPv4 static route information is not used.
Range Model
0 to 199 XG0224 / XG0448 / XG2600
Max definition number Model
200 XG0224 / XG0448 / XG2600