Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Packet Statistics Display and Clear Operation Commands
447
5.27.3 IPv6 Packet Statistics Display Commands
This section explains the commands related to IPv6 packet statistics display.
5.27.3.1 show ipv6 traffic
Function Display IPv6 packets statistics information
Available Model XG0224 / XG0448 / XG2600
Syntax show ipv6 traffic
show ipv6 traffic { tcp | udp | ip | icmp }
Options
N/A
Display all the IPv6 statistics information
tcp
Display TCP packets statistics information
udp
Display UDP packets statistics information
ip
Display IPv6 packets statistics information
icmp
Display ICMP packets statistics information
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display IPv6 packets statistics information
Execution Example
(To be continued)
# show ipv6 traffic
tcp6:
0 packets sent
0 data packets (0 bytes)
0 data packets (0 bytes) retransmitted
0 ack-only packets (0 delayed)
0 URG only packets
0 window probe packets
0 window update packets
0 control packets
0 packets received
0 acks (for 0 bytes)
0 duplicate acks
0 acks for unsent data
0 packets (0 bytes) received in-sequence
0 completely duplicate packets (0 bytes)
0 old duplicate packets
0 packets with some dup. data (0 bytes duped)
0 out-of-order packets (0 bytes)
0 packets (0 bytes) of data after window
0 window probes
0 window update packets
0 packets received after close
0 discarded for bad checksums
0 discarded for bad header offset fields
0 discarded because packet too short